|
|
 |
  |
Home |
Contact Us |
Site Map |
Search
|
|
|
  |
 |
|
|
|
|
|
|
|
Gerlich, A.
Adrian Gerlich obtained his BASc and PhD in Materials Science and Engineering at the University of Toronto. His thesis focused on friction stir welding, and involved determining the underlying mechanisms during weld formation, and characterization of the microstructures produced in aluminum and magnesium alloys. He took up his position at the University of Alberta in December 2007, and is currently examining friction stir welding, roll bonding of MMCs, and Ni-MMC materials for wear resistant overlay applications. News: Thank you to all the attendees for making IURS in Canmore a successful event! A copy of the final proceedings maybe downloaded. Teaching
Phase Transformations, Fall 2009
Welding Metallurgy – MATE 454/630, Winter 2010
Mechanical Properties – MAT E 351, Winter 2010
Recent Publications
Gerlich, A., Shibayanagi, T., (2009) Microstructures and Grain Boundary Sliding during Friction Stir Spot Welding of Al 2024 Alloy, Scripta Materialia, 60, pp. 236-239.
Lim, D.K., Shibayanagi, T., Gerlich, A.P., (2009) Synthesis of Multi-walled CNT reinforced Aluminium alloy Composite via Friction Stir Processing, Mat. Sci. Eng. A., 507, pp. 194-199.
Liyanage, T., Kilbourne, J., Gerlich, A.P., North, T.H., (2009) Joint Formation in Dissimilar Al-alloy/Steel and Mg-alloy/Steel Friction Stir Spot Welds, in press, Sci. Tech. of Welding and Joining.
Shibayanagi, T., Gerlich, A., Kashihara, K., North, T. H., (2009) Textures in Single Crystal Al Friction Stir Spot Welds, Metallurgical and Materials Transactions A, 40(4), pp. 920-931. PDF
Yamamoto M., Gerlich A., North T.H., and Shinozaki K., (2008) Cracking in Dissimilar Mg-alloy Friction Stir Spot Welds, Sci. Tech. Weld. Joining, Vol. 13(7), pp. 583-592.
Gerlich A., Yamamoto M., North T.H, (2008) Local Melting and Tool Slippage during Friction Stir Spot Welding of Al-Alloys, J. Mat. Sci., Vol. 43(1), pp. 2-11, DOI: 10.1007/s10853-007-1791-7.
Gerlich, A.P., Su, P., Yamamoto, M., and North, T.H., (2008) Material Flow and Intermixing during Dissimilar Friction Stir Welding, Sci. Tech. of Welding and Joining, Vol. 13(3), pp. 254-264.
|
|
|
|
|
|
|
|
 |
 |
|
|
|
|
||||
|
||||
